Opti-Mag Sensor (PN: OMS-PRX)
Opti-Mag Sensors use fiber optic based technology that allows sensing in locations that can extend for miles. They require no electrical power at the sensor location, making them extremely useful in remote areas where there is often no electrical service. They can also be used in flammable environments where electrical arcing (sparking) is prohibited. Being that there are no external moving parts, Opti-Mag Sensors have a long, reliable sensing life. The Opti-Mag Sensor does not require being in direct contact with the surface it is sensing.
Zoning Control Unit
The Zoning Control Unit is the heart of both the Opti-Mag Sensor and the Fiber Fence Sensor Systems. Using a VCSEL or laser light source, the Control Unit sends light through the fiber optic cable to one or more Opti-Mag or Mouse Trip sensors to which it is connected. When one of those sensors detect an event, the amount of light sent back to the Control Unit is reduced, thus causing the Unit to trigger a relay switch that can provide any number of desired outcomes.
Multiple control units provide multiple zone location sensing. For example, the relay can be configured to sound an alarm to an automated telephone dialup system.
Zoning Control Units are available in two different light source models:
Model OMS-CMV (standard) Includes an 850NM VCSEL light source for standard (3km) transmission range applications.
Model OMS-CML (extended) Includes a 1310NM high-power laser for use in extended range applications (10km).
Fiber Optic Cable
Opti-Mag and Fiber Fence sensor systems utilize either simplex or duplex 9/125 bend sensitive fiber cable with a UV protected jacket. Part number for the simplex fiber is OMS-SMPX and the part number for duplex fiber is OMS-DPX. CONSULT FACTORY FOR YOUR APPLICATION.
Splice Protection (PN: OMS-SPK)
Splice Protection Kits are used to protect and to insure the integrity of the fiber cable fusion (or mechanical) splices created for system installation. (For procedural instructions, refer to Manual, upon available request)
a. 1 - 4" metal protection tube
b. 1 - 5" black shrink tube
c. 2 - 1" clear shrink tube
d. 1 - copper mounting bracket
e. 1 - splice sleeve for fusion splice
Optional Splice Enclosures (PN: OMS-ENCL)
The Splice Enclosure provides additional protection for interior/exterior fusion (or mechanical) splice locations, or at system perimeter gate locations. It is recommended that Splice Protection Kit (PN: OMS-SPK) be used in conjunction with this enclosure. (Refer to Manual for mounting instructions)
Optional Rack and Power Supply
Each Fiber Instrument Sales' 2RU rack (PN: OMS-RMS) safely and conveniently holds up to four Zoning Control Units. Control Units can be installed in the rack upon request. If three or less units are required, use blank (PN: OMS-BLNK) to cover the open slot.
Note: The single power supply included in the purchase of each Zoning Control Unit is capable of powering up to four (4) Control Units. Additional power supplies are available using PN: OMS-PWRS. (220 Vac - 9Vdc 2A power supplies are available upon request. PN: OMS-PWRS220)
Zip Ties (PN: OMSDHZT)
Use double headed UV resistant zip ties to secure the sensing fiber to the fence.
(Refer to Manual for mounting instructions)